14.2 Adjusting the TimePressing the Clock Adjustment key causes the transceiver to enter Clock Adjustment Mode and then date and time canbe adjusted.Also, pressing the Menu key causes the transceiver to enter Menu Mode, and then the transceiver enters Clock AdjustmentMode by selecting “Clock Adjustment” and the date and time can be adjusted. (Refer to Using Menu Mode.)NoteWhen the data configured by using KPG-D1/ D1N is written to the transceiver, the date and time of the internal clock ofthe transceiver can be adjusted by sending the date and time configured on the PC to the transceiver. ( Program> Write Data to the Transceiver > Time Adjustment)Operating the transceiverThe following is the operation example when “Year/Month/Day” is configured in Date Format and “12H” is configured inTime Format:1 Press the Clock Adjustment key.A Key Beep A (1 beep) sounds from the transceiver, and then thetransceiver enters Clock Adjustment Mode.The following operations are the same even if the transceiver enters ClockAdjustment Mode by pressing the Menu key.2 Configure the year by pressing the [ ] or [ ] key, and then press the [ ] key.3 Configure the month by pressing the [ ] or [ ] key, and then press the [ ] key.12 : 34 AMDate 13/04/19Time 12:34 PMBackOKClock Adjust12 : 34 AMDate 14/04/19Time 12:34 PMBackOKClock Adjust12 : 34 AMDate 14/05/19Time 12:34 PMBackOKClock Adjust14 ADJUSTING THE TIME ON THE TRANSCEIVER14.2 Adjusting the TimeCommon FUNC (K, F)/Ver 2.20 238CONTENTS INDEX
