03/13 Rev. 5.08-01 USER MANUAL Servicing and Maintenance64-xx – 64-xx Dispenser4Servicing and cleaningNotes for cleaningIntervals Regular servicing and cleaning work is necessary for safe operation andhigh running performance. The servicing intervals are dependent on theoperation and ambient conditions, daily operating times and the printmedium. Regularly clean the print head and feed roller of paper, adhesive and inkresidues.Cleaning agentsPart to be cleaned Cleaning agent Ordering no.Printhead Printhead cleaning penCleaning paperEthyl or Isopropyl alcohol953275030Rubber rollers (e.g. printroller, feed roller, brakeroller)Cleaning agent for rubberrollers98925Deflection axles or tubesmade of metalMethylated spiritLabel remover A103198Outer surfaces Comercially availableneutral cleaning agentsTab. 1 Recommended cleaning agents. CAUTION! - Do not use any cleaning agents which could damage ordestroy the coating surfaces, labelling, display, type plates, electricalcomponents etc. CAUTION! - Under no circumstances should you use scouring or syntheticsolvent cleaning agents. Avoid acidic and alkaline solutions.
