06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)44The plain copy line of the barcodes EAN8, EAN13, UPC-A and UPC-E is prin-ted with the same fonts, which older printer types like TTK or TTX x50 haveused.UPC plain-copy64-xx ALX 92x DPM PEM ALX 73x (PMA)The position of the first and last digit in the plain-copy line - underneath thebar code - can be adjusted as required.Raised First and last digit of the UPCA or first digit with the UPCE are raised (defaultsetting).In line All digits in the decoded line are in line under the code.EAN Readline64-xx ALX 92x DPM PEM ALX 73x (PMA)<> Signs Readline enclosed in "<>" signs or terminated by a ">"-Sign (EAN 13).Standard Readline without "<>" or ">" signs (default).EAN sep. lines64-xx ALX 92x DPM PEM ALX 73x (PMA)EAN separation lines. Parameter for controlling of EAN or UPC barcodes ifthey are printed without readline.With readl. only (Default) The separation bars at the beginning, middle, and the end of thebarcode are only long, if the barcode is printed with a readline.Always long The separation bars at the beginning, middle, and the end of the barcode arealways long, regardless if the barcode is printed with or without readline. Theposition of the barcode is the same as with the readline option switched on.Dispense Mode64-xx ALX 92x DPMGoverns the run of the print-dispense procedure. Only if SYSTEM PARAMETER > Periph. device = „Tear-off edge“. The ribbon autoeconomy function can only be used in "Real 1:1 Mode"!Dispense only With this setting, the printer can be used as a mere dispenser without pro-cessing print jobs. Set the material length before you use this function.See parameter PRINT PARAMETERS > Material length.After calling "Dispense only", the printer restarts; afterwards, the following isdisplayed:Dispense onlyLabels 00 = Number of dispensed labels.
