06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)50Cut width64-xx Only with mounted and activated cutter (SYSTEM PARAMETER > Periph. device= „Cutter“).xxx Setting range: 0 to MAX_CUT_WIDTH;Default setting: MAX_CUT_WIDTHThe values for MAX_CUT_WIDTH depend on printer type and printhead: The values for MAX_CUT_WIDTH don´t equate to the real cut width (nolinear relation between value and cut width). The proper setting value has tobe determined by trying.Rewind direction64-xx Only with mounted and activated (external) rewinder(SYSTEM PARAMETERS > Periph. device = „Rewinder“).Determines the sense of rotation of the optional Rewinder.Printing outside Rewind direction: The printed label is facing outside.Printing inside Rewind direction: The printed label is facing inside.Rotated Barcodes64-xx ALX 92x DPM PEM ALX 73x (PMA)Improves readability of rotated (90° and 270°) bar codes.Normal „Normal“ printing without special processing of rotated bar codes.Optimized (Default setting) The line and gap widths of rotated bar codes are modified toimprove readability.Printer MAX_CUT_WIDTH64-04 10664-05 12864-06 16064-08 213AP 5.4 with 203 dpi 104AP 5.4 with 300 dpi 105AP 5.6 with 203 dpi 168AP 5.6 with 300 dpi 167
