06/15 Rev. 04 USER MANUAL Advanced ApplicationsAP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x19Setting the IP ParametersThe IP-parameter settings can either be set fix, or they can be requested from a DHCPserver with every start of the printer. To assist the system administrator, the DHCPserver is provided a device name on request, which consists of a combination of print-er type + 3 digits from the MAC address. (e.g. AP_5.4___300dpi_020049). The follow-ing values have been preset:• IP address: 192.168.1.99• Net mask: 255.255.255.0• Default gateway: 0.0.0.0 Connection to a name server is not required. WARNING: The address allocation for each device must be clear and unambigu-ous. Ask your network administrator for assistance!Transmission with Raw Socket InterfacePrinting data can be transmitted using a parameterisable socket interface (TCP serversocket on port number > 1024).This protocol is supported by• all Unix derivatives; a connection similar to that of terminal servers can be estab-lished.• Windows 2000, Windows XPA software package from external providers is required for Windows 95, Windows98 and Windows NT (e.g. Serial/IP by Tactical Software,http://www.tacticalsoftware.com).In this way you can set the Port address in the printer’s parameter menu:Menu Parameter DescriptionINTERF. PARAM. >NETWORK PARAMIP addressassign Here, please set “fixed IP address” or “DH-CP”.IP addressNet maskGateway addressIP parameter input fields, in case “fixed IPaddress” was set for the address assign ty-pe.[Tab. 18] Setting the IP parameters in the printer menuParameter DescriptionINTERF. PARAM. > NETWORK PARAM. > PortaddressHere you can select the port numberof the service in section 1024-65535INTERF. PARAM. > EASYPLUGINTERPR > In-terfaceHere a TCP/IP socket must be set inorder to receive printing data at theset port number.[Tab. 19] Setting the port address in the printer´s parameter menu
