06/15 Rev. 04 USER MANUAL Advanced ApplicationsAP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x28Data transmission with WLANAccording to standard IEEE 802.11bRequirementsSuitable printersRevision numberCPU board• AP 5.4, AP 7.t: at least 3 (A3927-03)• 64-xx, DPM, PEM, ALX 92x, ALX 73x: at least 4 (A6621-04) Displaying the revision number: SERVICE DATA > CPU BOARD DATA > CPU identifierWLAN CF cards • D-Link „DCF-660W“ (article number A7456)• Linksys „WCF12“ (no longer availabe)• Pretec „OC-WLBXX-A“ (no longer availabe) [16A][16] WLAN CF card (A) ; Wireless Access Point (B)Further requirements • Access point according to standard IEEE 802.11b station mode „infrastructure“ (e.g. „Netgear Wireless Access Point WG602“ [16B])• Ethernet crossed link cable (1:1 cable), to connect the access point to the hostcomputer• PC with operating system Windows XPNotesWLAN = Wireless Local Area NetworkThis section describes a simple setup, with which data transmission from a host com-puter (e. g. PC) via an access point to a label printer can be testet. This setup doesn´tsuit for real network operation.Printer FirmwareAP 5.4, AP 7.t 3.0064-xx, DPM, PEM, ALX 92x (each Gen. 3) 5.31ALX 73x 6.36[Tab. 20] Minimum firmware versions for use of WLAN.A B
