06/15 Rev. 10 USER + SERVICE MANUAL /Status Reports64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6261395 Label too wideStatus A printjob contains an #IM-command which sets the label width to ameasure exceeding the maximum print width. The maximum print widthdepends on the printer type. Refer to the user manual, topic section „Specifications“ for the maximumlabel width.Measure Reduce the label width set by the #IM-command in the concerned print job,until the label width matches the maximum print width. Please read the notes in section Easy-Plug errors .1396 Label too longStatus Label length setting exceeds the maximum label length. The maximumlabel length depends on the memory configuration of the printer. The info-printout „Memory Status“ shows among other data the maximumlabel length. Read more about info-printouts in topic section „Info-Printoutsand Parameters“.Measure Reduce the label width setting. Please read the notes in section Easy-Plug errors .1397 Label too shortStatus The label length defined in the #IM command is smaller than the minimumadmissible length. The label length is set to the minimum value.Measure Correct the length value in the label layout definition. Please read the notes in section Easy-Plug errors .1398 Label too smallStatus The label width defined in the #IM command is smaller than the minimumadmissible width. The label width is set to the minimum value.Measure Correct the width value in the label layout definition. Please read the notes in section Easy-Plug errors .1404 UTF8 data wrongStatus Character code > 0xffffMeasure Check/change the character code.1470 X-OffsetStatus The x-position of a layout element (graphics, text, ...) is beyond the labelmargin. The element is shifted automatically to the first admissible positionat the correct side of the margin.Measure Check the x-positions of the layout elements and change them, ifnecessary. Please read the notes in section Easy-Plug errors .
