06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)66WLAN SSID64-xx ALX 92x DPM PEM ALX 73x (PMA) Only with plugged-in WLAN CF-cardA Service Set Identifier (SSID) is the identification of a radio frequency net-work, which is based on IEEE 802.11.Each WLAN owns a configurable SSID, by which the network is identified.The SSID is the name of the network.The SSID character string is configured in the base station (Access Point) ofthe WLAN. It must be also configured on all clients, which are supposed toaccess the access point. The SSID is attached uncoded to all pakkets toidentify them as part of that network.xxxxxxxxxxx… The SSID consists of a maximum of 32 alphanumeric characters. Default set-ting: „avery“ Detailed information about using the WLAN feature: read the user manual,topic section Advanced Applications .WLAN WEP64-xx ALX 92x DPM PEM ALX 73x (PMA) Only with plugged-in WLAN CF-cardWEP („Wired Equivalent Privacy“) is an encryption scheme for WLAN.Off (Default setting) Communication with the host is not encoded.64Bit key Communication with the host is encoded using 64 Bit WEP encoding.128Bit key Communication with the host is encoded using 128 Bit WEP encoding. Detailed information about using the WLAN feature: read the user manual,topic section Advanced Applications .WLAN default key64-xx ALX 92x DPM PEM ALX 73x (PMA) Only with plugged-in WLAN CF-cardSelection of the encryption key, which is used for packet transmission.x Setting range: 1-4; Default setting: 1 Detailed information about using the WLAN feature: read the user manual,topic section Advanced Applications .
