06/15 Rev. 10 USER + SERVICE MANUAL /Status Reports64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6809117 Device UnknownStatus Occurs during a firmware update, if the device information in the header ismissing.Measure Switch printer off and on again. Check the configuration.9118 H8 Update Fail.Status The update of a H8 device failed.Measure Switch printer off and on again.9119 H8 missingStatus Occurs during a firmware update of a H8 device, if no such device wasfound.Measure Check the configuration.The status message is cancelled automatically. The download continues.9122 Checksum errorStatus Checksum error while loading a firmware file. The checksum of the loadeddata doesn´t match the calculated checksum.Measure Repeat the download. If the error continues to occur, the file is probably damaged or corrupted.Check/ exchange the firmware file.9123 Memory unavailableStatus Error while loading a firmware file. There is not enough free memoryavailable.Measure Restart machine and repeat the download. If the error continues to occur: Reduce the memory which is assigned bythe following parameters:- SYSTEM PARAMETERS > Ram disc size- SYSTEM PARAMETERS > Font downl. area- SYSTEM PARAMETERS > Free store size
