10/14 Rev. 03 USER/SERVICE MANUAL Technical Data64-xx Gen. 2/36Performance dataPrint technology Thermal direct printing, thermal transfer printingPrinthead "Corner Edge“ typeResolution 12 dots/mm (300 dpi 1 )Print speedPrint speed 64-0xDispenserPrint width (actual) • 64-04:106.6 mm• 64-05:127.9 mm• 64-06:159.9 mm• 64-08:213.2 mmOutput mode 1:1 and 100 % printable, either with or without cut. Non-printable area:• 1 mm from the front label edge (1st edge in feed direction) and• 1 mm from the left band border (right border in feed direction).1. Exact: 304.8 dpiPrinter Print speed(mm/s)Print speed(inch/s)64-04/05 50 to 406 2 to 1664-06 50 to 359 2 to 1464-08 50 to 229 2 to 9[Tab. 2] Print speeds of the 64-xx printers(Unit interval 25,4 mm/s (1 “/s), respectively)Printer Ribbonauto-econ.Setting of parameter „Transport mode“„Dispensermotor“„Dualmotors“„Printermotor“64-04/05 Dispenser Off 12 "/s 12 "/s 16 "/sOn 8 "/s 12 "/s 16 "/s64-06 Dispenser Off 12 "/s 12 "/s 14 "/sOn 8 "/s 12 "/s 14 "/s64-08 Dispenser Off 10 "/s 10 "/s 9 "/sOn 8 "/s 10 "/s 9 "/s[Tab. 3] The maximum print speed of the dispenser printers depends on the setting of the parameter SYS-TEM PARMETERS > Transport mode. The values are recommendations, up to which proper functioningof the printer is guaranteed.
