5-49GENERATOR AND STARTER CLUTCHEAS20140GENERATOR AND STARTER CLUTCHRemoving the generator rotor and starter clutchOrder Job/Parts to remove Q’ty RemarksEngine oil Drain.Refer to “CHANGING THE ENGINE OIL” onpage 3-27.Coolant Drain.Refer to “CHANGING THE COOLANT” onpage 3-31.Bottom side cowling/Side panel/Bottom centercowling Refer to “GENERAL CHASSIS (1)” onpage 4-1.Center cover/Fuel tank cover assembly/Sidecover (left)/Rear side cowling assembly (left)/Footboard (left)Refer to “GENERAL CHASSIS (2)” onpage 4-11.V-belt case air filter element (left)/Generatorcover protector/Water pump inlet pipe/Waterpump outlet pipe/Water pump assembly Refer to “WATER PUMP” on page 6-11.1 Centerstand lock solenoid coupler 1 Disconnect.2 Crankshaft position sensor coupler 1 Disconnect.3 Stator coil coupler 1 Disconnect.4 Generator cover 14231(3)(17)NewNewSpecified angle 120˚EEEEELT10 N•m (1.0 kgf•m, 7.4 lb•ft)T.R.32 N•m (3.2 kgf•m, 24 lb•ft)T.R.65 N·m (6.5 kgf·m, 48 lb·ft)1st2ndT .R.Specified angle 120˚