9-155P1604, P1605EAS20617P1604, P1605EAS33097TROUBLESHOOTINGItem• [P1604] Lean angle sensor: ground short circuit detected.• [P1605] Lean angle sensor: open or power short circuit.Fail-safe system• Unable to start engine• Unable to drive vehicleProcedure1. Connection of lean angle sensor coupler.• Check the locking condition of the coupler.• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of thepins).2. Connection of ECU coupler.• Check the locking condition of the coupler.• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of thepins).3. Wire harness continuity.• Disconnect the lean angle sensor coupler and ECU coupler.• Open circuit checkIs the coupler condition normal?YESGo to step 2.NOa. Connect the coupler securely or replace the wire harness.b. Push the ON/start switch, then to “OFF”, and then back to “ON”.c. Check the condition of the DTC using the malfunction mode of the YDT.Is it in the “Recovered” condition?YESGo to step 6, and complete the service.NOGo to step 2.Is the coupler condition normal?YESGo to step 3.NOa. Connect the coupler securely or replace the wire harness.b. Push the ON/start switch, then to “OFF”, and then back to “ON”.c. Check the condition of the DTC using the malfunction mode of the YDT.Is it in the “Recovered” condition?YESGo to step 6, and complete the service.NOGo to step 3.