9-125P05645. Defective cruise control setting switch.• Replace the handlebar switch (left).• Push the ON/start switch.• Push the “RES+” side and “SET–” side of the cruise control setting switch, and then check the con-dition of the DTC using the malfunction mode of the YDT.6. Check the fuse. (main fuse, ignition fuse, cruise control fuse)Is resistance ?YESGo to step 5.NOa. Replace the wire harness.b. Push the ON/start switch.c. Push and release the “RES+” side of the cruise control setting switch, and then check the condi-tion of the DTC using the malfunction mode of the YDT.Is it in the “Recovered” condition?YESGo to step 10, and complete the service.NOGo to step 5.Is it in the “Recovered” condition?YESGo to step 10, and complete the service.NOGo to step 9.Is check result OK?YESGo to step 7.NOa. Replace the fuse.b. Push the ON/start switch.c. Push and release the “SET–” side of the cruise control setting switch, and then check the condi-tion of the DTC using the malfunction mode of the YDT.Is it in the “Recovered” condition?YESGo to step 10, and complete the service.NOGo to step 7.