9-78P0107, P0108• Short circuit checkTIPDisconnect the ECU related connectors before checking.Refer to “PARTS CONNECTED TO THE ECU” on page 9-3.Ground short circuit check “A”Lines short circuit check “B”Between intake air pressure sensor coupler “1”and ECU coupler “2”[P0108] black/blue–black/blue[P0107, P0108] pink–pink[P0108] blue–blueB/YLY/GPLg/LO/WW/GY/LLg/WB/LBr/WGy/GG/LR/GLg/LW/GW/YG/RLg/BL/WLgB/YLY/GPW/GY/LLg/WB/LBr/WGy/GLg/LW/GW/YG/RL/WLgB/L P L12*2***. XP560D**. XP560EIs resistance 0 ?YES Go to “Short circuit check”.NOa. Replace the wire harness.b. Push the ON/start switch, and then check the condition of the DTC using the malfunction modeof the YDT.Is it in the “Recovered” condition?YES Go to step 7, and complete the service.NO Go to “Short circuit check”.Between intake air pressure sensor coupler “1”and ground[P0108] black/blue–ground[P0107, P0108] pink–ground[P0108] blue–groundIntake air pressure sensor coupler “1”[P0108] black/blue–any other coupler terminal[P0107, P0108] pink–any other coupler terminal[P0108] blue–any other coupler terminalECU coupler “2”[P0108] black/blue–any other coupler terminal[P0107, P0108] pink–any other coupler terminal[P0108] blue–any other coupler terminal