9-75P00D1, P2195• Short circuit checkTIPDisconnect the ECU related connectors before checking.Refer to “PARTS CONNECTED TO THE ECU” on page 9-3.Ground short circuit check “A”Lines short circuit check “B”Is it in the “Recovered” condition?YES Go to step 8, and complete the service.NO Go to “Short circuit check”.Between O2 sensor coupler “1” and groundred/blue–groundblack/green–groundgray/green–groundblack/blue–groundO2 sensor coupler “1”red/blue–any other coupler terminalblack/green–any other coupler terminalgray/green–any other coupler terminalblack/blue–any other coupler terminalECU coupler “2”black/green–any other coupler terminalgray/green–any other coupler terminalblack/blue–any other coupler terminalFuel injection system relay coupler “3” red/blue–any other coupler terminalR/L B/GGy/G B/LOB/GY/RBR/BG/BY/WBY/RR/LBBR/LL/YY/WRB/YLY/GPLg/LO/WW/GY/LLg/WB/LBr/WGy/GG/LR/GLg/LW/GW/YG/RLg/BL/WLgB/YLY/GPW/GY/LLg/WB/LBr/WGy/GLg/LW/GW/YG/RL/WLgRR/LR/B L/YR/L B/GGy/G B/LA B11322*2***. XP560D**. XP560EIs resistance ?YES Go to step 5.NOa. Replace the wire harness.b. Start the engine and let it idle for approximately 1 minute.c. Check the condition of the DTC using the malfunction mode of the YDT.