Yamaha TMAX 2020 Service Manual

5-58CLUTCHEAS30346REMOVING THE CLUTCH1. Remove:• Clutch assembly nut “1”• Clutch assembly “2”TIP• Before removal, put alignment marks “a” and“b” as shown.• While holding the clutch assembly with the ro-tor holding tool “3”, loosen the clutch assemblynut.• Align these marks during reassembly.EAS31441DISASSEMBLING THE CLUTCH1. Remove:• Clip “1”TIPWhile compressing the clutch springs with theclutch spring compressor “2”, remove the clip.2. Remove:• Spring stopper plate “1”TIPTo ensure proper balance of the clutch assem-bly, one to three holes “a”, or no hole at all, mayhave been drilled in the spring stopper plate. Be-fore removing the spring stopper plate, makealignment marks on both the plate and the clutchhousing so that the plate can be reinstalled in itsoriginal position.3. Loosen:• Clutch boss nut “1”TIPWhile holding the clutch boss “2” with the univer-sal clutch holder “3”, loosen the clutch boss nut.Rotor holding tool90890-01235Universal magneto and rotorholderYU-01235Clutch spring compressor90890-01482ab12231Universal clutch holder90890-04086Universal clutch holderYM-91042123