8-107ELECTRICAL COMPONENTSc. Measure the radiator fan motor movement.EAS30578CHECKING THE COOLANT TEMPERATURESENSOR1. Remove:• Coolant temperature sensorRefer to “THERMOSTAT” on page 6-9.WARNINGEWA14130• Handle the coolant temperature sensorwith special care.• Never subject the coolant temperature sen-sor to strong shocks. If the coolant tem-perature sensor is dropped, replace it.2. Check:• Coolant temperature sensor resistanceOut of specification Replace.a. Connect the digital circuit tester () to thecoolant temperature sensor terminals asshown.b. Immerse the coolant temperature sensor“1” in a container filled with coolant “2”.TIPMake sure the coolant temperature sensorterminals do not get wet.c. Place a thermometer “3” in the coolant.d. Heat the coolant or let it cool down to thespecified temperature.e. Measure the coolant temperature sensorresistance.3. Install:• Coolant temperature sensorEAS30581CHECKING THE THROTTLE POSITIONSENSOR1. Remove:• Throttle position sensor(from the throttle bodies)WARNINGEWA16690• Handle the throttle position sensor withspecial care.• Never subject the throttle position sensorto strong shocks. If the throttle positionsensor is dropped, replace it.2. Check:• Throttle position sensor maximum resistanceOut of specification Replace the throttleposition sensor.a. Connect the digital circuit tester () to thethrottle position sensor terminals as shown.• Positive battery terminal Blue “1”• Negative battery terminal Black “2”Coolant temperature sensorresistance2513–2777 at 20 C(2513–2777 at 68 F)Coolant temperature sensorresistance210–221 at 100 C(210–221 at 212 F)Digital circuit tester (CD732)90890-03243Model 88 Multimeter withtachometerYU-A1927Coolant temperature sensor15 N·m (1.5 kgf·m, 11 lb·ft)Resistance1.26–2.34 k312G089056T R..