9-19754_ABSEAS2071154_ABSEAS33375TROUBLESHOOTINGItemHydraulic unit assembly (defective ABS solenoid and ABS motor power supply circuits)Procedure1. Defective battery• Recharge or replace the battery, and check again.Refer to “CHECKING AND CHARGING THE BATTERY” on page 8-94.2. Defective coupler between the battery and the hydraulic unit assembly• Check the coupler for any pins that may be pulled out.• Check the locking condition of the coupler.TIPPush the OFF/LOCK switch before disconnecting or connecting a coupler.3. Wire harness continuity• Disconnect the ABS ECU fuse, ABS motor fuse and ABS ECU coupler.• Open circuit check• Short circuit checkTIPDisconnect the ABS ECU related connectors before checking.Refer to “PARTS CONNECTED TO THE ABS ECU” on page 9-4.Is check result OK?YES Go to step 3.NO If there is a malfunction, repair it and connect the coupler securely.Between ABS ECU fuse holder “1” and ABSECU coupler “3” brown/whiteBetween ABS motor fuse holder “2” and ABSECU coupler “3”red/blue–red/blueIs resistance 0 ?YES Go to “Short circuit check”.NO Replace the wire harness.BW/GG/RW/YWBBWR/WB/GB/LLg/WLg/LBr/WLgLgG/YR/L123