9-117P0500• Short circuit checkTIPDisconnect the ECU related connectors before checking.Refer to “PARTS CONNECTED TO THE ECU” on page 9-3.Ground short circuit check “A”Lines short circuit check “B”5. Malfunction in ECU.• Replace the ECU.Refer to “REPLACING THE ECU (Engine Control Unit)” on page 8-93.• Execute the diagnostic mode. (Code D07)• Rotate the rear wheel by hand and check that the indicated value increases.Between ABS ECU coupler “2” and groundblack–groundwhite–groundwhite/green–groundRear wheel sensor coupler “1” black–any other coupler terminalwhite–any other coupler terminalABS ECU coupler “2”black–any other coupler terminalwhite–any other coupler terminalwhite/green–any other coupler terminalECU coupler “3” white/green–any other coupler terminalB/YLY/GPLg/LO/WW/GY/LLg/WB/LBr/WGy/GG/LR/GLg/LW/GW/YG/RLg/BL/WLgB/YLY/GPW/GY/LLg/WB/LBr/WGy/GLg/LW/GW/YG/RL/WLgB WBW/GG/RW/YWBBWR/WB/GB/LLg/WLg/LBr/WLgLgG/YR/LBW/GG/RW/YWBBWR/WB/GB/LLg/WLg/LBr/WLgLgG/YR/L122A B3*3***. XP560D**. XP560EIs resistance ?YES Go to step 5.NOa. Replace the wire harness.b. Execute the diagnostic mode. (Code D07)c. Rotate the rear wheel by hand and check that the indicated value increases.Is that value increased?YES Go to step 7.NO Go to step 5.