EDITING FUNCTIONS- 103 -2134567Full ImageYou can copy the entire image of an original including any finetext at its edge. This function is called “full image”. With thisfunction, the image will be copied with its reproduction ratioreduced by approx. 1 to 5%.1 Place paper in the tray(s).2 Place the original(s).3 Press [ZOOM] on the touch panel.4 Select sizes for the original and copy paper.1) Select the original size.2) Select the paper size.3) Press [OK].The menu returns to the BASIC menu.5 Press [FULL IMAGE] on the EDIT menu.6 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Omit Blank PageYou can remove blank sheets included in the scanned originalsbefore copying is started. This function is called “omit blankpage”.Note• This function may not properly detect blank sheets includedin the following types of originals:- Half-tone originals- Originals including sheets almost blank (e.g. blank pageshaving only page numbers)• If you copy 2-sided originals including blank sheets to 2-sided copy while this function is enabled, the front and backsides of the originals and the copies will not match.Memo• The sensitivity to detect blank pages can be changed. Fordetails, refer to the "Setting Items/Printing" ( P.228).1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [OMIT BLANK PAGE] on the EDITmenu.1 35 61 35 6
