MANAGING PRINT JOBS FROM THE CONTROL PANEL- 80 -2134567• 2-SIDEDSet 2-Sided Printing.1 SIDE — Select this to print only one side.BOOK — Select this to print on both sides by setting avertical binding margin. Pages are turned over from rightto left.TABLET — Select this to print on both sides by setting ahorizontal binding margin. Pages are turned over frombottom to top.• PDF OverprintIf a PDF file contains an overprint, this is also overprintedon a print job when this option is enabled.OFF — Select this not to overprint the job.ON — Select this to enable overprint the job.ON (PDF/X ONLY) — Select this to enable overprint thejob only when the original PDF file is complied with PDF/X specifications.Note• The paper size can be set only when you print a JPEGfile. (If you print more than one JPEG file continuously,the paper size you set for the first file in this step isapplied to the second and the following.)• The PDF Overprint setting is applied only to objectsoverprinted in the original PDF file. If you want topreview the effect of overprint in the PDF file, you cando it with the Overprint Preview mode of Adobe Readerby switching the preview screen.10 Press [PRINT].• The equipment starts printing. The printouts aredirected to the receiving tray.• The job in progress can be monitored from the [JOBS]tab listing the Normal Print jobs.Before Disconnecting the USB Storage Device:Make sure that “USB DEVICE in use. Do not removeUSB DEVICE.” is not displayed on the touch panel. If it is,do not disconnect the USB storage device; removing thedevice while the message is displayed could destroy thedata in the device or cause a malfunction of theequipment.Viewing the Print Job LogYou can view the log of print jobs on the touch panel.Viewing the print job log1 On the touch panel, press [JOB STATUS].
