SETTING ITEMS (ADMIN)- 266 -2134567Note• While the panel calibration operation is being performed, noother operations can be performed on the touch panel. Ifyou open the front cover of the equipment during the panelcalibration operation and instructions to replace tonercartridges are displayed, close the front cover to completethe panel calibration operation before proceeding to replacethe toner cartridges.Exporting logsYou can export logs of each operation displayed in the LOG list(PRINT/SEND/RECEIVE/SCAN) on the JOB STATUS screento a USB storage device.1 Connect your USB storage device to theUSB port on the equipment.2 Begin exporting the log data.1) Select the log file format from CSV or XML.2) Select the log type to export.3) Press [SAVE] to begin exporting.Memo• You can select only one log type per operation.Note• Do not remove the USB storage device until the datatransfer is complete. Removing the device while dataare being transferred could destroy them or cause amalfunction of the equipment.3 When exporting is complete, press [OK].4 Remove the USB storage device from theUSB port on the equipment.Setting job skipYou can set to skip a copy or print job that failed due somereason and proceed to others.Memo• For instructions on how to resolve the cause of a skippedcopy or print job, refer to "MANAGING PRINT JOBS FROMTHE CONTROL PANEL" ( P.68).Changing the keyboard layoutYou can change the layout of the on-screen keyboard to adifferent one.On the KEYBOARD LAYOUT screen, select the desiredkeyboard layout, and press [OK].You will be returned to the GENERAL menu (2/2).Item name DescriptionJOB SKIP CONTROL • ON — Press this button toenable the function.• OFF — Press this button todisable the function.
