PRINTING FROM Macintosh- 63 -21345671) RGB Source profilesThis selects RGB source profile. When you obtained colorprofile data from this equipment, its RGB source profiledata appear.2) CMYK Source profilesThis selects CMYK source profile. When you obtained colorprofile data from this equipment, its CMYK source profiledata appear.3) Apply to Device Color onlySelect this check box when you give priority to color profilesembedded in the image.4) Destination profilesThis selects destination profile. When you obtained colorprofile data from this equipment, its destination profile dataappear.5) Rendering IntentThis selects an image processing method for color spaceconversion when you print.- Perceptual — This is recommended for photo images.- Relative colorimetric — More original colors can beretained than those when you select [Perceptual].- Saturation — This is recommended when thevividness of colors is more important than their correctreproduction. It is useful for graphic charts.- Absolute colorimetric — Original colors can beretained even on colored paper.6) [Revert to defaults]Click this to return the Advanced Color Settings to thedefaults.7) [Use these settings]Click this to save the color profile data set for thisequipment and return to the Color Settings 1 menu. Print ModeIn the Print Mode menu, you can set the way this equipmenthandles the print job. This menu allows you to enable variousjob types such as Private Print, Proof Print and Hold Print.1) Department CodeSelect whether the entry of a department code is requiredor not for printing. Select this check box to enable thisoption if this equipment is managed under departmentcodes. When you do this, enter a department code in thebox on the right. For your department code, ask theadministrator.Memo• Specify a department code in 1 to 63-digit alphanumericcharacters.• A department code must consist of one-byte characterssuch as numbers from 0 to 9, letters of the alphabet fromA to Z (in both capital and small ones), a hyphen (-), anunderscore (_), and a period (.).2) Print ModeThis sets the type of print job.- Normal — Select this to print a job normally.- Proof — Select this to print the first copy of a multicopyjob and then wait for approval before printing theremaining copies. If a print job is sent as a proof job,one copy of the job is printed and the remaining copiesare saved in the proof job queue on this equipment,which are not printed until you activate printing from thetouch panel display. This option allows you to check thejob’s output before printing the remaining copies andthereby reduce paper waste.- Private — Select this to print a private job. When thisis selected, specify the 5-digit password in the field nextto the box. The print job is saved in the private jobqueue on this equipment, and not printed until youactivate printing from the touch panel display of thisequipment. This option is useful when you want to printa confidential document secured with a password. Theuser has to enter the password to print the private jobwhen activating printing from the touch panel display.12456731234
