PRINTING FROM WINDOWS- 33 -2134567Update AutomaticallySelect this check box to update the option configurationinformation automatically every time you open the [DeviceSettings] tab.[Update Now]Click this to obtain the configuration information from thisequipment immediately.Memo• If the connection to the equipment has not beenconfigured correctly, the message “The address of yourmachine could not be located. Would you like to find it?”will be displayed when you click [Update Now]. If it isdisplayed, click [Yes] and search for the equipmentusing the [Local Discovery] dialog box. After searchingfor the equipment, SNMP communication will beenabled. For the instructions on how to search for theequipment, refer to the instructions ofTopAccessDocMon.Note• If you disable SNMP Communication,TopAccessDocMon notification also will be disabled.9) [Restore Defaults]Click this to restore the configuration of this equipmentdisplayed in the [Device Settings] tab menu to the originalfactory defaults.Tray Settings1) Paper SizeSelect the paper size set in each tray.2) Paper TypeSelect the paper type set in each tray.3) AttributeSelect the attribute of the paper. When you set the attribute,the tray will be selected preferentially according to the printsettings.4) Override Application Paper Source SettingsSelect this check box to use the paper source setting in theprinter driver rather than the application setting.5) [Restore Defaults]Click this to restore the settings displayed in the [TraySettings] dialog box to the original factory defaults.Memo• Trays selectable differ depending on the optionconfiguration.Account SettingsMemo• When SNMP communication is enabled, the followingaccount information is automatically obtained from theequipment.1) User AuthenticationSelect the authentication method which is to be used. Set itto correspond to that of your MFP.- Off — Select this not to perform user authentication.- MFP Local Authentication — Select this to performMFP Local Authentication.- Windows Domain Authentication — Select this toperform Windows Domain Authentication.- LDAP Authentication — Select this to perform LDAPAuthentication.2) Enter the user credentials manuallyWhen this check box is selected, you are prompted to enteryour user name and password every time you print adocument. This option is available when any of MFP LocalAuthentication, Windows Domain Authentication, or LDAPAuthentication is selected in the [User Authentication] box.Memo• This option can be used together with any of the userauthentication functions (MFP Local Authentication,Windows Domain Authentication, LDAP Authentication).3) User NameThe user name that is entered to log in to your computer isdisplayed.4) Domain NameThe domain name on which the equipment belongs isdisplayed.1 23451234567
