PRINTING FROM Macintosh- 64 -2134567- Hold — Select this option to print a hold job. The printjob, sent as a hold job, is saved in the hold job queue onthis equipment. To perform printing, select the desiredjob on the touch panel display and press [PRINT]. Thisoption is useful to prevent you from forgetting to removeprinted sheets.3) Distinguish Thin LinesSelect this check box to print thin lines clearly.4) Do not Print Blank PagesSelect whether you require blank pages to be printed.Note• When more than 2 is selected at the [Page per Sheet]option in the Layout menu, the blank pages will beprinted.• Pages with a header or footer will be printed even if thecontent is blank. Printer FeaturesIn the Printer Features menu, you can set special printingfeatures.FinishingIn the Finishing menu, you can set the destination and stapling.1) DestinationThis selects the destination tray.- Printer’s Default — Select this to set the output to thedefault tray (that is set as such for raw jobs in theMachine setting page of TopAccess Administrator’spage).- Face down/up stacker — Select this to set the outputto the face down/up stacker of this equipment.- Tray 1 — Select this to set the output to the tray of theFinisher.Note• Destinations selectable differ depending on the optionconfiguration.• Depending on the equipment settings, the paper may bedelivered to a tray that cannot carry out stapling when[Printer’s Default] is selected as the [Destination] option.2) StaplingThis sets whether a print job is stapled.- Off — Select this to print without stapling.- Upper Left (Portrait) / Upper Right (Landscape) —Select this to staple on the upper left for a portraitdocument, or on the upper right for a landscapedocument.Note• This option cannot be selected if a Finisher is notinstalled.BookletIn the Booklet menu, you can set booklet printing.1) Booklet Paper SizeSelect a paper size for the booklet. Both sides of a sheetare printed as two pages. The booklet size will be half thesize of the paper size that you specify.2) Left to Right Page LayoutSelect this check box to create a booklet that can be readfrom left to right.3) Booklet Center MarginSelect the width of the margin added to the center.121234
