SETTING ITEMS (ADMIN)- 287 -21345673 Press [OK].When the integrity check is complete, the message “Theprocess was finished successfully.” will be displayed onthe CONFIRMATION screen.Note• It may take some time to complete the integrity check.• When you press [OK] in the above screen while a job isbeing processed, the message “Process cannot beperformed while Job is processing or Admin function isin progress.” will be displayed on the CAUTIONscreen. In this case, press [CLOSE], and wait until thejob is complete, then perform the operation again.• Periodically perform the integrity check. If an error,such as illegally modified data, is detected, the servicecall screen will be displayed. In this case, contact yourservice representative.4 Press [OK] to reboot the equipment.The equipment reboots.LIST/REPORTThis menu allows you to perform the following operations: P.287 "Setting the report" P.289 "Printing lists"Memo• For instructions on how to display the LIST/REPORT menu,see the following page: P.250 "Accessing the Admin Menu"Setting the reportThis menu allows you to make required settings for printing thefollowing reports:• Transmission / Reception Journal P.287 "Setting the transmission / reception journaloutput"There are two types of journals available on this equipment.Journals can be printed either automatically or manually. Ifyou select [AUTO], you can specify the number oftransmissions and receptions after which to print eachjournal.MemoThe old journals are deleted and only the specified numberof journals beginning with the newest one are kept. Themost recent 100 journals can be exported as a file fromTopAccess administrator mode.• Communication Report P.288 "Setting the communication report"The communication report allows you to print a report afterevery transmission. You can also select the conditions forprinting communication reports for each transmission type.• Reception List P.288 "Setting the communication report"The settings for the reception list allows you to specifywhether to print a reception list when the mailbox on thisequipment has received a document. This can be set foreach the following mailbox transactions:- RELAY STATION — When a relay transmission hasbeen received from an originator as a relay hub.- LOCAL — When the mailbox on this equipment hasbeen reserved for a local document.- REMOTE — When the mailbox on this equipment hasbeen reserved for a remote document from anotherfacsimile.Setting the transmission / reception journaloutput1 On the LIST/REPORT menu, press[REPORT SETTING].The REPORT SETTING screen is displayed.2 Press [JOURNAL].The JOURNAL screen is displayed.
