EDITING FUNCTIONS- 92 -21345676 Key in the read values.1) Press [X1], [X2], [Y1] and [Y2], and then key in theread values correspondingly.2) You can specify up to 4 areas on 1 page. Whenyou want to specify more than one area, press[AREA 1] to [AREA 4] to switch the area, and thenkey in the values correspondingly.3) Press [OK] after you have specified all the areas.7 Place the original again on the documentglass with its face down.Place it with its bottom right to you. Align its top sideagainst the left side of the document glass.8 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Mirror image / Negative/positive reversalYou can reverse an image like a mirror (mirror image), or youcan reverse light-and-dark of an image (negative/positivereversal).Note• Negative/positive reversal is available only when BLACK orFULL COLOR is selected as a color mode.1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [EDITING] on the EDIT menu.4 Select [MIRROR] or [NEG/POS], and thenpress [OK].5 Select other copy modes as required, andthen press the [START] button on thecontrol panel.XY ZoomYou can change the reproduction ratio in both vertical andhorizontal directions separately. This function is called “XYzoom”.Mirror imageNegative/Positive reversal
