EDITING FUNCTIONS- 88 -21345674 Select the type of binding margin.5 Adjust the width of the binding margin.1) Press [FRONT MARGIN] and adjust the bindingmargin width on the front side using [ 0 mm](0") and [ 100 mm] (3.94"). (The width on theback side will be also adjusted in the same way.)2) Press [BACK MARGIN] and adjust the bindingmargin width on the back side using [ 0 mm](0") and [ 100 mm] (3.94"). (Only the width onthe back side will be adjusted.)3) Press [OK].Memo• Note that a left/right binding margin will be created onthe opposite side on the back side of paper in duplexcopying. (For example, when a binding margin iscreated on the right of the front side of the paper, it willbe created on the left of the back side.)6 Press [OK].7 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Edge EraseYou can whiten the edge of the copied image when a shadow-like dark part appears on it. This function is called “edgeerase”. It is useful when you want to make the copied imageneat and clear if the edge of the original is dirty or torn.Memo• Only standard size originals are applicable.1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [EDGE ERASE] on the EDIT menu.
