SETTING ITEMS (ADMIN)- 288 -21345673 Specify the following items as required andpress [OK].Setting the communication report1 On the LIST/REPORT menu, press[REPORT SETTING].The REPORT SETTING screen is displayed.2 Press [COMM. REPORT].The COMM. REPORT screen is displayed.3 Specify the conditions for eachtransmission type and press [OK].Note• Items other than [MEMORY TX] and [MULTI TX] areavailable only when the FAX Unit is installed.When you press [ALWAYS] or [ON ERROR] for otherthan [DIRECT TX] and [POLLING], the “Print 1st pageimage?” message is displayed. Press [YES] when youwant to print the communication report by adding thefirst page of the sent document. Press [NO] when not.Setting the reception list1 On the LIST/REPORT menu, press[REPORT SETTING].The REPORT SETTING screen is displayed.Item name DescriptionAUTO Press [ON] to enable printing thetransmission and reception journalsautomatically. When you enable thisoption, the transmission andreception journals will be printedwhen the specified numbers oftransactions are completed.TX JOURNAL Press the number button thatspecifies the number oftransmissions you want to be printedin the transmission journal.RX JOURNAL Press the number button thatspecifies the number of receptionsyou want to be printed in thereception journal.Item name DescriptionMEMORY TXDIRECT TXMULTI TXPOLLINGRELAY ORIGINATORRELAY STATIONRELAY DESTINATION• OFF — Press this buttonto disable printing ofcommunication report.• ALWAYS — Press thisbutton to always print thecommunication report.• ON ERROR — Press thisbutton to print thecommunication report inthe event of an error.
