EDITING FUNCTIONS- 90 -21345675 Select other copy modes as required, andthen press the [START] button on thecontrol panel.When the originals are placed on the RADF, scanningand copying start. When they are placed on the documentglass, follow steps 6 and 7.6 Place the next original, and then press[NEXT COPY] on the touch panel or the[START] button on the control panel.Scanning of the next original starts. If you have more thanone original, repeat this step until the scanning of all theoriginals is finished.7 When the scanning of all the originals isfinished, press [JOB FINISH] on the touchpanel.Copying starts.Magazine Sort ModeYou can copy more than one original in the book-type pageorder. This mode is called the magazine sort mode.Magazine sort modeThe magazine sort mode can also be selected on the BASICmenu. For details, see the following page: Basic Guide1 Place paper in the tray(s).2 Select the paper size.3 Place the original(s).Memo• When placing portrait originals in a landscape directionas shown on the follow in the magazine sort mode setthe image direction function to ON on the EDIT menu.Otherwise the originals will not be copied in the properpage order. P.101 "Image Direction"4 Press [MAGAZINE SORT] on the EDITmenu.5 Set the binding margin width as required.1) Press either [ 2 mm] (0.08") or [ 30 mm](1.18") to adjust the binding margin width.2) Press [OK].6 Select other copy modes as required, andthen press the [START] button on thecontrol panel.123211129476
