EDITING FUNCTIONS- 94 -2134567Cover SheetYou can add a special type of paper such as colored paper asa front cover sheet or a back cover sheet. This function iscalled “cover sheet”. In the cover sheet mode, you can selectwhether or not to copy the front or back cover sheet as shownin the table below.Example: Selecting “TOP COPIED” for the front coverand “BLANK” for the back coverA sheet copied on the top is added as the front cover and ablank sheet as the back cover.1 Place the paper for the cover sheets.Place it on the multi-purpose tray or in a tray previouslyset for cover sheets. The paper for the cover sheets mustbe placed in a different paper source than normal paper.Note• When placing paper in a tray for cover sheets, be sureto select “COVER” as the paper type, and also set thepaper size and thickness.• When placing paper on the multi-purpose tray, be sureto set the paper size and thickness. Basic Guide• Place the paper for cover sheets of the same size asnormal paper in the same direction.2 Place the normal paper in the tray(s).3 Place the original(s).When placing them on the document glass, they must beplaced from the first page.4 Press [COVER SHEET] on the EDIT menu.5 Select the front and back cover settings,and then press [OK].Memo• You can select [BOTH COPIED] for the front or backcover sheet only when [1->2 DUPLEX] or [2->2DUPLEX] is set for the 2-sided copy mode on thebasic menu.6 Press the [BASIC] tab to display the BASICmenu. Then select a tray in which normalpaper is placed (not the one for the coversheets).You must place the normal paper of the same size anddirection as that for the cover sheets in advance.Front coverMode DescriptionNONE Does not add a sheet as the front coverBLANK Adds a blank sheet as the front coverTOP COPIED Adds a sheet copied on the top side as thefront coverBOTH COPIED Adds a sheet copied on both sides as thefront coverBack coverMode DescriptionNONE Does not add a sheet as the back coverBLANK Adds a blank sheet as the back coverTOP COPIED Adds a sheet copied on the top side as theback coverBOTH COPIED Adds a sheet copied on both sides as theback coverONLY BACKCOPIEDAdds a sheet copied on the back side asthe back coverREPORT2003321 REPORT2003
