2134567SETTING ITEMS (ADMIN)- 250 -● SETTING ITEMS (ADMIN)Accessing the Admin MenuFollow the steps below to display the ADMIN menu in theSETTING screen.1 Press the [SETTING] button on the controlpanel to access the SETTING menu.2 Press the [ADMIN] tab.• When the User Management function is disabled, youmust enter the administrator password.Proceed to the next step.• When the User Management function is enabled, youmust log into the MFP as a user with administratorprivileges.When you press the [ADMIN] tab, the ADMIN menu willbe displayed.Proceed to step 5.Note• If you log into the MFP as a user without administratorprivileges, the [ADMIN] tab will be unavailable.Setting role information allows you to give privileges tousers. For details of role information, refer to theTopAccess Guide “Chapter 7: [User Management]Tab Page”.3 Press [PASSWORD].The on-screen keyboard is displayed.For details of the on-screen keyboard, see the followingpage: P.320 "On-screen keyboard"4 Enter the administrator password andpress [OK].The ADMIN menu is displayed.Memo• If the administrator password has not been changedbefore, enter the default administrator password“123456”.• The input password appears as asterisks (*).5 Proceed with the administrative operationthat you require.Pressing on the ADMIN menu (1/2) displays ADMINmenu (2/2).The SETTING screen contains the following buttons. Fordetails of each button, see the corresponding page.ADMIN menu (1/2)ADMIN menu (2/2) P.230 "GENERAL" P.268 "NETWORK" P.231 "COPY" P.232 "FAX" P.281 "FILE"
