SETTING ITEMS (ADMIN)- 260 -21345676 Remove the USB storage device from theUSB port on the equipment.Memo• After the installation is complete, it is necessary toreboot the equipment. When the message “Reboot themachine” is displayed on the touch panel, turn thepower of the equipment OFF and then back ON byusing the [POWER] button on the control panel.Adding or removing display languagesYou can add new languages to be used on the touch panel,and also remove those you no longer need. Furthermore, fromthis menu, you can also change the default language used onthe touch panel to a different one. P.260 "Adding a language" P.261 "Removing a language" P.261 "Setting the default language"Memo• The following language packs are initially installed on theequipment.• When adding a language, store the desired language packin the root directory of your USB storage device in advance.• For information of languages which can be newly added,contact your dealer.Adding a language1 On the LANGUAGES screen, press[INSTALL].The LOCALIZATION PACK INSTALLATION screen isdisplayed.2 Connect your USB storage device in whichthe language pack is stored to the USB porton the equipment, and press [OK].The SELECT A FILE screen is displayed.3 Select the language pack that you want toinstall, and press [INSTALL].The installation confirmation screen is displayed.4 Press [YES].The installation begins.Note• Do not remove the USB storage device until the datatransfer is complete. Removing the device while dataare being transferred could destroy them or cause amalfunction of the equipment.English (US) English (UK) GermanFrench Spanish ItalianDanish Finnish NorwegianSwedish Dutch PolishRussian Japanese Simplified ChineseTraditional Chinese Turkish
