SETTING ITEMS (USER)- 230 -2134567GENERALYou can change the initial settings (defaults) for the equipment.Memo• For instructions on how to display the GENERAL menu, seethe following page: P.229 "Accessing the User Menu"This menu allows you to perform the following operations:Note• The displayed buttons differ depending on the model.Changing the display languageYou can change the language used on the touch panel to adifferent one. Selecting the desired display language andpressing [OK] changes the language used on the display tothat selected.Memo• To add a display language, see the following page: P.260 "Adding or removing display languages"Setting the reversed displayYou can display the touch panel reversed when normal displayis too bright for you, or you want to display it more clearly.Press [ON] to enable the reversed display, or [OFF] to disablethe reversed display.Screen in reversed display modeAdjusting the display settingYou can adjust the touch panel brightness.On the DISPLAY SETTING screen, adjust the brightness bypressing or .Memo• Pressing [RESET] resets the display setting back to thefactory default.Setting the calibrationYou can automatically calibrate the color gradation when theshading and hue are not reproduced accurately in the imagesscanned by this machine.Instructions on how to perform calibration are the same aswhen it is performed from the ADMIN menu.See the following page: P.257 "Setting the calibration"Note• [CALIBRATION] is displayed in the USER menu only when[CALIBRATION] in the DISPLAY LEVEL screen of theADMIN menu is set to [USER]. For instructions on how tochange the display level, see the following page: P.257 "Setting the calibration display level" P.230 "Changing the displaylanguage" P.230 "Setting the reversed display" P.230 "Adjusting the display setting" P.230 "Setting the calibration"
