SETTING ITEMS (ADMIN)- 253 -2134567You can specify up to three E-mail addresses for thedestination of the notification message.Memo• You can specify events that you want to be notified aboutusing the TopAccess web utility. For instructions on how tospecify events for notification, refer to the TopAccessGuide “Chapter 8: [Administration] Tab Page".Note• To enable this function, there must be a SMTP server inyour network. In addition, the settings to enable Internetcommunication on this equipment must be configuredcorrectly.1 On the NOTIFICATION screen, press [E-MAIL].The on-screen keyboard is displayed.For details of the on-screen keyboard, see the followingpage: P.320 "On-screen keyboard"2 Enter the E-mail address and press [OK].Memo• You can specify up to three E-mail addresses to whichnotification messages will be sent, if needed. Toenable notification, you must have at least one E-mailaddress entered.3 Press [ON] for the E-mail address to receivenotification, and then [OK].To disable notification for an E-mail address, press [OFF].Note• [ON] is available only after an E-mail address isentered.Changing the administrator passwordand resetting the service passwordYou can change the administrator password.1 On the PASSWORD SETUP screen, press[ADMIN PASSWORD] or [RESET SERVICEPASSWORD].The screen for changing the administrator password isdisplayed.If [RESET SERVICE PASSWORD] has been selected,the message "Are you sure?" is displayed on theATTENTION screen.Press [YES] to reset the service password.2 Press [OLD PASSWORD].The on-screen keyboard is displayed.For details of the on-screen keyboard, see the followingpage:
