SETTING ITEMS (ADMIN)- 258 -21345672 Select the paper type and press [OK].Note• Depending on the machine settings, the screen toselect the paper type may not be displayed. In thiscase, proceed to the next step.3 Select the calibration settings.4 Place the printed chart face down on theglass, so that the two black rectangularmarks are placed on the left side.5 Press the [START] button on the controlpanel.The calibration begins. Do not operate the equipmentuntil the message “Scanning and calibrating” disappears.Note• If the chart is not properly placed, the message “Setchart correctly” is displayed on the touch panel. In thiscase, return to step 3 and realign the chart.Changing the roughness of printYou can switch the line density level of images in printing.This setting applies to print jobs with 600 dpi. Set this to colorand black printing, respectively.Memo• Changing the setting displays the CONFIRMATION screenthat asks you whether you want to perform calibration ornot. Select [OK] or [CANCEL] as required.Setting the status messageYou can have a status message displayed at the bottom of thetouch panel, notifying the occurrence of specified events, suchas paper empty and toner low.Press [ON] or [OFF] for each status message and press [OK].Setting the auto clear functionYou can set how long the machine waits before clearing theprevious operation left uncompleted on the control panel.Press the desired period of time (in seconds). If you want todisable the Auto Clear function, press [NO LIMIT].Note• Selecting [NO LIMIT] does not clear the control panel forany mode including the SETTING, JOB STATUS, andTEMPLATE screens.Managing the option licensesYou can view product information, such as the license ID forcertain options. You can also install these options on theequipment if necessary. P.258 "Viewing product information" P.259 "Installing an option"For installation, be sure to follow the dealer’s instructions.Viewing product information1 On the LICENSE MANAGEMENT screen,select the option for which you want toconfirm product information, and press[DETAILS].The LICENSE DETAILS screen is displayed.Item name DescriptionDEFAULT Press this button to restore thedefault calibration setting and returnto the previous screen.CALIBRATION Press this button to calibrate usingthe printed chart. In this case,proceed to the next step.Item name DescriptionHIGH Press this button to print with the normal linedensity level.LOW Press this button to print with the lower linedensity level than a normal one.Item name DescriptionTONER NEAREMPTYMESSAGEEnabling this option displays a messageat the lower left of the screen when toneris low in a toner cartridge.PAPER EMPTYMESSAGEEnabling this option displays a messageat the lower left of the screen when thereis no paper in a tray.
