103Functions Used As NeededSet ModeSet mode option No./setting Item Description of function Setting Item(Bold letters: Default)Referencepage9-26 POSITIONCOMMENTSet up the position commentfunction.Off Duty / En Route /In Service / Returning /Committed / Special / Priority /Custom 0 to 6 / EMERGENCY!–9-27 SmartBeaconing Set the smart beaconing function. STATUS:OFF / TYPE1 / TYPE2 / TYPE3LOW SPD: 2mph to 30mphHIGH SPD: 31mph to 90mphSLOW RATE: 1min to 100minFAST RATE: 10sec to 180secTURN ANGL: 5° to 90°TURN SLOP: 1 to 255TURN TIME: 5sec to 180sec–9-28 TIME ZONE Set the time zone. UTC ±13.0 H / UTC+0:00 –* For more details of functions, refer to the APRS Section in the instruction manual.10 SD CARD10-1 BACKUP Write or read the informationabout your transceiver into orfrom the micro SD memory card.Write to SD / Read from SD 13710-2 MEMORY CH Write or read the memorychannel information into or fromthe micro SD memory card.Write to SD / Read from SD 13710-3 GROUP ID Write or read GROUP IDinformation into or from the microSD memory card.Write to SD / Read from SD 13810-4 FORMAT Format the micro SD memorycard.Format 2411 OPTION11-1 USB CAMERA Set the USB CAMERA imagesize and resolution.SIZE: 160×120 / 320×240QUALITY: LOW / NORMAL /HIGH13912 CALLSIGN Set the CALLSIGN. – 140Displaying the GPS screen.When using the GPS function, you can display the GPS information on the LCD.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [1 DISPLAY].3 Press H.4 Turn O to select [1 GPS INFO].5 Press H to display the GPS information on the LCD.