136Functions Used As NeededSet Mode4 Turn O to select [20 TOT].5 Press H.6 Turn O to select the time.Set the time for the transceiver to automatically return tothe reception state in steps of 30 seconds.OFF/30 SEC to 10 MINRemark Default: OFF7 Press p to save the TOT function setting, and exit the Setmode.Tips• When the time-out timer function is active, a beep is emitted when it comes near the set time. About10 seconds later, the transceiver returns to the reception state.• Once the time is set, it is retained until “OFF” is selected in step 6 of the above-mentionedprocedure.Setting the frequency selection range foroperation in the VFO modeVFO MODE FunctionYou can set the frequency selection range for operating in the VFO mode.Enter the Set mode:1 Press and hold M over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [21 VFO MODE].5 Press H.6 Turn O to select a frequency range.ALL: Switches to the next band when the end of a band isreached.BAND: Moves to the other end of the band when the end ofthat band is reached.Remark Default: BAND7 Press p to save the frequency selection range setting,and exit the Set mode.
