119Functions Used As NeededSet Mode4 Turn O to select [7 PR FREQUENCY].5 Press H.6 Turn O to tune in to a frequency.Select no-communication squelch frequency in steps of100 Hz.Remark Default: 1600 Hz7 Press p to set the no-communication squelch function,and exit the Set mode.Adjusting the squelch level SQL LEVEL FunctionYou can set squelch level to mute the raspy noise heard.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.4 Turn O to select [8 SQL LEVEL].5 Press H.6 Turn O to select a squelch level.Select from among LEVEL 0 to LEVEL 15.The higher the squelch level, the greater the noisereduction.Remark Default: LEVEL 17 Press p to save the selected squelch type, and exit theSet mode.Setting the signal strength to output soundS Meter Squelch FunctionYou can set A-Band and B-Band individually to output the sound only when receiving asignal stronger than signal strength level set to the S-Meter Level.1 Select a band as an operating band.2 Press and hold M for over 1 second to enter the Setmode.3 Turn O to select [4 SIGNALING].4 Press H.䎛 䎃 䎶 䎴 䎯 䎃䎶 䎴 䎯 䎃 䎃䎯 䎨 䎹 䎨 䎯䎜 䎃 䎶 䎴 䎯䎶 䎴 䎯 䎃 䎶 䙵 䎰 䎨 䎷 䎨 䎵䎨 䎷 䎨 䎵䎔 䎓䎔 䎓 䎃 䎶 䎴 䎯 䎃䎶 䎴 䎯 䎃 䎃䎨 䎻䎳䎤 䎱䎤 䎱 䎷 䎬 䎲 䎱䎲 䎱䎔 䎔䎔 䎔 䎃 䎶 䎴 䎯 䎃䎶 䎴 䎯 䎃 䎃䎷 䎼䎳䎨䎃 䎛 䎃 䎶 䎴 䎯 䎃䎶 䎴 䎯 䎃 䎃䎯 䎨 䎹 䎨 䎯䎃 䎃 䎃 䎃 䎯 䎨 䎹 䎨 䎯 䎃 䎔䎃䎶 䎨 䎷 䎝 䎃 䎃 䎗䎶 䎨 䎷 䎝 䎃 䎃 䎗 䎃 䎶 䎬 䎪 䎱 䎤 䎯 䎬 䎱 䎪䎱 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎘 䎃 䎶 䎦 䎤 䎱䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䫹䎙 䎃 䎪 䎰䎪 䎰䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎺 䎬 䎵 䎨 䎶 䙵 䎻
