56Scanning FunctionScanning FunctionUsing the Scanning FunctionThe FT1DR/DE supports the following four scan modes:(1) VFO Scan(2) Memory Channel Scan(3) Programmable Memory Channel Scan(4) Selected Memory Channel ScanVFO Scan1 Switch to the VFO mode, and then select a band to scan.2 Press F and then 2 to start scanning (SCAN) towardhigher frequencies.Tips When a signal is received during scanning, the decimal pointblinks.Turn O clockwise: Scanning is performed toward higherfrequencies.Turn O counterclockwise: Scanning is performed towardlower frequencies.When a signal is received during scanning, a beep is emitted and its frequency appears for 5seconds. When scanning is suspended, the decimal point blinks and the LCD stays lit. Afterreceiving the signal for 5 seconds, scanning resumes.The range for scanning can be selected by selecting the Set mode options [5 SCAN WIDTH]and then [5 SCAN] .When a signal is received,the decimal point blinks.
