91Communicating with a Specific Remote StationUsing the Tone Squelch FunctionSetting the Code of Your StationSet the personal code (your code) to be called by other stations.Enter the Set mode:1 Press and hold M over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.4 Turn O to select [6 PAGER].5 Press H.6 Turn O to select [CODE-RX].7 Press H.8 Turn O to select a code.Select the first code from among 1 to 50.9 Press H.The cursor [] moves.10 Turn O to select a code.Select the second code from among 1 to 50.Caution The second code must be different from the first code.11 Press p to set your station code and exit from the Setmode.Tips • Default: 05 47• The first and second codes contained in your personal codemay be reversed, i.e., [47 05] from [05 47] but recognized asthe same code.• If the same personal code (group code) is specified for allpersons, all persons can be called at the same time.Turning on the New Pager FunctionEnter the Set mode:1 Press and hold M over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.4 Turn O to select [11 SQL TYPE].5 Press H.6 Turn O to select [PAGER].7 Press p to set the new pager function and exit from theSet mode.You can make a call, or wait for a call from a remotestation, using the new pager function.PAG appears.
