52Using the MemoryConvenient Preset Receiver Memory ChannelsRecalling Preset Receiver Memory Channel to Listen to theInternational VHF (Marine) RadioThe frequencies (57 channels) used for the international VHF (marine) radio areregistered to the dedicated preset receiver memory channels.1 Press A to set A-band to the operating band.2 Press F and then 3 to enter the Preset Receiver mode.3 Press B.Select [SP2 INTVHF].4 Turn O to select a preset VHF receiver memory channelto listen to.Remark To stop reception of the international VHF radio, press3.In the event of extreme weather disturbances, such as storms and hurricanes, theNOAA (National Oceanic and Atmospheric Administration) sends a weather alertaccompanied by a 1050 Hz tone and subsequent weather report on one of the NOAAweather channels. You may enable the Weather Alert tone via Set Mode option[4 SIGNALING] [14 WX ALERT], if desired (See page 122).Tips• The preset receiver memory channel cannot be rewritten with the data of another frequency.• To scan the preset receiver memory channels toward higher channel numbers, press F and then2.Turning O one click counterclockwise scans the preset receiver memory channels toward lowerchannel numbers. If a signal is received during scanning, the scanning is suspended for 5 seconds.• The operation that is performed when scanning stops can be set by following the proceduredescribed in “Selecting a Reception Method When Scanning Stops” on page 59.WX Channel Frequency ListCH Frequency CH Frequency1 162.550 MHz 6 162.500 MHz2 162.400 MHz 7 162.525 MHz3 162.475 MHz 8 161.650 MHz4 162.425 MHz 9 161.775 MHz5 162.450 MHz 10 163.275 MHz䎬䎱䎷䎬䎱䎷䎃 䎹䎫䎩
