34Basic OperationMiscellaneous SettingsSetting clock timeThis transceiver is equipped with an internal clock. The clock is used to display the time,and also to turn the transceiver on or off at a specified time (timer function). Set theclock before using the transceiver for the first time.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [19 DATE & TIME ADJ].5 Press H.6 Turn O to set [YEAR].7 Press H.The cursor moves to [MONTH].8 Turn O to set [MONTH].9 Repeat steps 5 and 6.Set [DAY], [HOUR], and [MINUTE]Pressing F moves the cursor to the setting item shown on the left.Remark The hour appears in the 24-hour clock format.Tip If GPS information is received, the clock will be set automatically.Next, set the time signal alarm.If you do not want to set the time signal alarm, proceed to step 3 described in “Settingthe Time Signal”.Setting the Time SignalSet the time signal so that a tone is emitted at 00 minute of each hour.1 Press B.The cursor moves to [– –].2 Turn O to select “SIG”.If you select [TIME SIGNAL] you will hear a time signaltone (beep) at 00 minute of each hour.If you do not want to hear the time signal tone, leave “– –” as it is.3 Press H.The cursor moves to [SET].4 Press H to save the [TIME SIGNAL] setting.5 Press p to exit from the Set mode.Remark When “MONOBAND RECEPTION” is selected, the current time appears on the LCD.䎔 䎜 䎃䎔 䎜 䎃 䎃 䎧 䎤 䎷 䎨 䎃 䎃䎉 䎃䎉 䎃 䎃 䎷 䎬 䎰 䎨 䎃 䎃 䎤 䎧 䎭䎰 䎨 䎃 䎃 䎤 䎧 䎭䎕 䎓䎕 䎓 䫹 䎷 䎲 䎷䎕 䎔䎕 䎔 䫹 䎹 䎩 䎲 䎃 䎰 䎲 䎧 䎨䎕 䎕 䎃䎕 䎕 䎃 䎃 䎹 䎬 䎥 䎵 䎤 䎷 䎲 䎵䎤 䎷 䎲 䎵䎕 䎓 䎔 䎖 䎑 䎓 䎔 䎑 䎓 䎔䎕 䎓 䎔 䎖 䎑 䎓 䎙 䎑 䎓 䎔䎕 䎓 䎔 䎖 䎑 䎓 䎙 䎑 䎔 䎚䎓 䎓 䎝 䎖 䎚 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎶 䎨 䎷 䎃䎶 䎨 䎷 䎃䎓 䎓 䎝 䎖 䎚 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎶 䎨 䎷 䎃䎶 䎨 䎷 䎃䎓 䎓 䎝 䎖 䎚 䎃 䎃䎚 䎃 䎃 䎶 䎬 䎪 䎃䎪 䎃 䎃 䎶 䎨 䎷䎶 䎨 䎷䎓 䎔 䎝 䎔 䎙 䎃 䎃䎙 䎃 䎃 䎶 䎬 䎪 䎃䎪 䎃 䎃 䎶 䎨 䎷 䎃䎶 䎨 䎷 䎃
