83Convenient FunctionsTaking picture with the optional camera mounted on speaker microphone.Send Image ButtonA picture just taken can besent.LensAim this lrns towards the object to photograph.Do not touch the lens with fingers or other objects.PTT SwitchPress this button to transmit,and release it for reception.SpeakerSound is emitted from here.Shutter ButtonPress this button to take apicture.MicrophoneSpeak into here with anormal voice.ClipSecurely clip the microphoneto belt or other objects.ConnectorConnector to connectthe speaker microphonewith camera to thetransceiverPay attention to the alignment of connectorwhen connecting the speaker microphonewith camera to the ranceiver.Connecting it forcibly to the transceivermay cause damage.1 Connect the speaker microphone with camera (MH-85A11U) to the DATA terminal ofthe transceiver.2 Press P to turn the transceiver on.3 Press .Point the lens towards the object to shoot and press .Make sure to have at least 50cm between the lens and the object. If the object is tooclose, the picture will be out of focus, resulting in a blurred picture.Tips • You can set the picture size (resolution) and image quality (compression rate) of the image,by selecting [11 OPTION] [1 USB CAMERA] in the Set mode.• Captured images are saved to the microSD memory card installed in the transceiver.• If your transceiver and another compatible transceiver are both in digital mode, a picture justtaken may be sent to the other transceiver by pressing .Caution Do not directly photograph objects with strong light, such as the sun or other bright objects. Suchoperation can lead to malfunction. If the lens or the microphone gets dirty, use a dry, soft cloth to wipe off the contaminants. Do not place the MH-85A11U near heat emitting equipment or where it is exposed to direct sunlight.Doing so can lead to fire or a malfunction. Do not drop the MH-85A11U. Applying a strong shock to the MH-85A11U may result in damages orfailure.
