90Communicating with a Specific Remote StationUsing the Tone Squelch Function4 Turn O to select [1 BELL].5 Press H.6 Turn O to select [RINGER].7 Press H.8 Turn O to select the number of times the bell rings.Remark Default: OnceTip You can select the number of times the bell rings from among 1to 20 times, or continuous.9 Press p to set the selected number of times the bell ringsand exit from the Set mode.Calling Only a Specific Station New Pager FunctionWhen using the transceivers with your friends, specifying personal codes (each codecomposed of two CTCSS tones) allows you to call only a specific station. Even if thecalled person is not near his or her transceiver, the information on the LCD indicatesthat he or she has been called.Mr. C sends the personalcode of Mr. B.Three persons A, B, and Care using the transceiver.Only Mr. B is called.I’m goingto callMr. B. Ring,ring,ringFlow of Operation to Use the Pager FunctionSet the same code as that of the remote station.Determine a frequency.Perform transmission/reception.Confirm reception according to the informationon the LCD and the bell sound.䎔 䎃䎔 䎃 䎃 䎥 䎨 䎯 䎯䎥 䎨 䎯 䎯䎃 䎃 䎶 䎨 䎯 䎨 䎦 䎷 䎃 䎃䎶 䎨 䎯 䎨 䎦 䎷 䎃 䎃 䎃䎝 䎃 䎃 䎥 䎨 䎯 䎯䎝 䎃 䎃 䎥 䎨 䎯 䎯䎃 䎃䎵 䎬 䎱䎪 䎨 䎵 䎃 䎝 䎃 䎃 䎔 䎃 䎃 䏗 䏌 䏐 䏈䏐 䏈
