124Functions Used As NeededSet Mode4 Turn O to select [3 SCAN RE-START].5 Press H.6 Turn O to select the time to resume scanning.Select from 0.1 SEC to 10 SEC.Remark Default: 2 seconds7 Press p to set the resume scanning time, and exit the Setmode.Selecting a reception method when scanning stopsSet the reception method for when scanning stops.For more details, see “Selecting a Reception Method When Scanning Stops” on pageP. 59.Setting the range for SCANYou can set the frequency range for scanning with the SCAN Function.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [5 SCAN].3 Press H.4 Turn O to select [5 SCAN WIDTH].5 Press H.6 Turn O to select [VFO].7 Press H.8 Turn O to select the range for scanning.Specify the scanning range with reference to the next list.9 Press M.10 Turn O to select [MEMORY].11 Press H.䎃䎖 䎃 䎶 䎦 䎤 䎱 䎃䎶 䎦 䎤 䎱 䎃 䎃䎵 䎨 䙵 䎶 䎷 䎤 䎵 䎷䎃 䎃 䎃 䎃 䎃 䎘 䎑 䎓 䏖 䏈 䏆䏖 䏈 䏆䎃䎖 䎃 䎶 䎦 䎤 䎱 䎃䎶 䎦 䎤 䎱 䎃 䎃䎵 䎨 䙵 䎶 䎷 䎤 䎵 䎷䎗 䎃 䎶 䎦 䎤 䎱 䎃䎶 䎦 䎤 䎱 䎃 䎃䎵 䎨 䎶 䎸 䎰 䎨䎨 䎶 䎸 䎰 䎨䎃䎘 䎃 䎶 䎦 䎤 䎱 䎃䎶 䎦 䎤 䎱 䎃 䎃䎺 䎬 䎧 䎷 䎫䎧 䎷 䎫䎃 䎔 䎃 䎧 䎺 䎃䎧 䎺 䎃 䎃䎷 䎬 䎰 䎨䎶 䎨 䎷 䎝 䎃 䎃 䎘 䎃 䎶 䎦 䎤 䎱䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎙 䎃 䎪 䎰䎃 䎃 䎃 䎃 䎃 䎃 䫹䎚 䎃 䎺 䎬 䎵 䎨 䎶 䙵 䎻䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎛 䎃 䎦䎲䎱 䎩 䎬 䎪