121Functions Used As NeededSet ModeSetting the squelch type for transmission and receptionSQL EXPANTION FUNCTIONSquelch types set beforehand can function separately for transmission and reception.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.4 Turn O to select [10 SQL EXPANTION].5 Press H.6 Turn O to select [ON].ON: Use separate squelch for transmission and reception.OFF: Use the same squelch for transmission andreception.Remark Default: OFF7 Press p to save the separate squelch setting, and exit theSet mode.Setting the type of tone squelchSet the tone squelch to open the squelch only when a signal containing the specifiedfrequency tone is received.For more details, see “Using the Tone Squelch Function” on page 84.Selecting a tone frequencySelect the tone frequency from 50 types between 67.0 MHz and 254.1 MHz.For more details, see “Setting a Tone Frequency” on page 85.Setting the sound and speed during tone searchTone Search FunctionSound can be muted during tone search. The operation speed of the tone search canalso be changed.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.䎔 䎖 䎃 䎷 䎲 䎱䎨 䙵 䎶 䎵 䎦 䎫䎃 䎔 䎃 䎃 䎥 䎨 䎯 䎯䎃 䎕 䎃 䎃 䎧 䎦 䎶 䎃 䎃䎦 䎲 䎧 䎨䎃 䎖 䫹 䎧 䎦 䎶 䎃 䎃䎬 䎱 䎹 䎨 䎵 䎶 䎬 䎲 䎱䎶 䎨 䎷 䎝 䎃 䎃 䎗䎶 䎨 䎷 䎝 䎃 䎃 䎗 䎃 䎶 䎬 䎪 䎱 䎤 䎯 䎬 䎱 䎪䎱 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎘 䎃 䎶 䎦 䎤 䎱䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䫹䎙 䎃 䎪 䎰䎪 䎰䎃 䎃 䎃 䎃 䎃 䎃 䎃䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎺 䎬 䎵 䎨 䎶 䙵 䎻
