118Functions Used As NeededSet Mode4 Turn O to select [3 DCS INVERSION].5 Press H.6 Turn O to select a phase.When a phase is selected for the reception side, the phasefor transmission side is automatically determined.Reception: [Homeomorphic], [Both Phase],[Inverted Phase], [Homeomorphic],[Both Phase], [Inverted Phase]Transmission: [Homeomorphic], [Inverted Phase],[Inverted Phase], [Inverted Phase], [Homeomorphic], [Homeomorphic]Remark Default: Reception [Homeomorphic], Transmission [Homeomorphic]7 Press p.The phase of DCS code is set, and exits from the Set mode.Setting the transmission method of the DTMF codeSet the transmission method of the registered DTMF code.For more details, see “Sending the Registered DTMF Code” on page 80.Setting DTMF codeThe maximum of 16 digit DTMF code can be registered for a telephone number to makea call through the public telephone line from a phone patch.For more details, see “Using DTMF Function” on page 79.Calling only a specific stationNew Pager FunctionWhen using transceivers with your friends, specifying personal codes allows only aspecific station to be called.For more details, see “Calling Only a Specific Station New Pager Function” on page 90.Enabling no-communication squelch functionPR FREQUENCY FunctionYou can set a no-communication squelch frequency in steps of 100 Hz within the rangefrom 300 Hz to 3000 Hz.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [4 SIGNALING].3 Press H.䎖 䎃䎖 䎃 䎃 䎧 䎦 䎶 䎃 䎃 䎬 䎱 䎹 䎨 䎵 䎶 䎬 䎲 䎱䎗 䎃䎗 䎃 䎃 䎧 䎷 䎰 䎩 䎃䎰 䎩 䎃 䎃䎰䎲䎧 䎨䎘 䫹 䎧 䎷 䎰 䎩 䎃䎰 䎩 䎃 䎃䎶 䎨 䎯 䎨 䎦 䎷䎙 䫹 䎳 䎤 䎪 䎨 䎵䎃 䎖 䎃 䎧 䎦 䎶 䎃䎶 䎃 䎃 䎬 䎱 䎹 䎨 䎵 䎶 䎬 䎲 䎱䎲 䎱䎃 䎃 䎃 䎃 䎃 䎃 䎵 䎻 䙵 䎱 䎲䎵 䎰 䎤 䎯䎵 䎰 䎤 䎯䎃 䎃 䎃 䎃 䎃 䎃 䎃䎷 䎻 䙵 䎱 䎲䎵 䎰 䎤 䎯䎵 䎰 䎤 䎯䎶 䎨 䎷 䎝 䎃 䎃 䎗 䎃 䎶 䎬 䎪 䎱 䎤 䎯 䎬 䎱 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎘 䎃 䎶 䎦 䎤 䎱䎃 䎃 䎃 䎃 䎃 䎃 䫹䎙 䎃 䎪 䎰䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎚 䎃 䎺 䎬 䎵 䎨 䎶 䙵 䎻
