135Functions Used As NeededSet ModeDisabling reception while no signal is receivedReception Save FunctionTo reduce power consumption, the reception function can be turned off when notreceiving a signal.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.4 Turn O to select [17 SAVE RX].5 Press H.6 Turn O to select the time.Select the time for the reception to be turned offautomatically.0.2 SEC (1:1) to 1.0 SEC (1:5) (Step: 0.1 sec)to 1.0 SEC (1:5) to 10 SEC (1:50) (Step: 0.5 sec)to 1.0 sec (1:50) to 60 sec (1:300 sec) step 5 secOFFRemark Default: 0.2 sec (1:1)7 Press p to save the Reception Save function setting, and exit the Set mode.Changing the frequency step manuallyFrequency step can be set so that it can be changed manually.For more details, see “Changing the Frequency Step Manually” on page 37.Setting clock timeSet the time for the internal clock of this transceiver.For details, see “Setting clock time” on page 34.Restricting the continuous transmission timeTOT FunctionSet the transceiver to automatically return to the receive mode after transmittingcontinuously for a certain period of time. Accidental transmission of unnecessarysignals, and unwanted battery power consumption can be prevented (time-out timerfunction).Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [8 CONFIG].3 Press H.䎔 䎚 䎃䎔 䎚 䎃 䎃䎶 䎤 䎹 䎨 䎃 䎃 䎵 䎻䎶 䎤 䎹 䎨 䎃 䎃 䎵 䎻䎔 䎛 䎃䎔 䎛 䎃 䎃䎶 䎷 䎨 䎳䎔 䎜䎔 䎜 䫹 䎧 䎤䎧 䎤 䎷 䎨 䎃䎃 䎉䎃 䎃 䎷 䎬 䎰 䎨 䎃 䎃䎤 䎧 䎭䎤 䎧 䎭䎕 䎓䎕 䎓 䫹 䎷 䎲 䎷䎷 䎲 䎷䎔 䎚 䎃䎔 䎚 䎃 䎃䎶 䎤 䎹 䎨 䎃 䎃 䎵 䎻䎶 䎤 䎹 䎨 䎃 䎃 䎵 䎻䎃 䎃䎃䎃 䎃䎃 䎃 䎃 䎃䎓 䎑 䎕 䏖 䏈 䏆䏖 䏈 䏆 䎋 䎔 䎝 䎃 䎔 䎃䎃 䎔 䎃 䎃 䎃 䎌䎃 䎌䎃䎶 䎨 䎷 䎝 䎃䎶 䎨 䎷 䎝 䎃 䎃䎛 䫹 䎦 䎲 䎱 䎩 䎬 䎪䎃 䎃 䎃 䎃 䎃 䎃 䎃 䎃䎜 䫹 䎤 䎳 䎵 䎶䎃 䎃 䎃 䎃 䎃 䎃 䫹䎔 䎓䎔 䎓 䫹 䎶 䎧 䎃 䎃䎦 䎤 䎵 䎧䎦 䎤 䎵 䎧䎃 䎃 䎃 䎃 䎃 䎃䎔 䎔䎔 䎔 䫹 䎲 䎳 䎷 䎬 䎲 䎱