138Functions Used As NeededSet Mode4 Turn O to select [2 MEMORY CH].5 Press H.6 Turn O to select [Write to SD] or [Read from SD].Write to SD: A beep is heard and [Completed] appearswhen writing to SD finished.Read from SD: A beep is heard when loading from SDfinished and the transceiver restarts withthe settings read from the microSD memorycard. (The operation in step 9 is notrequired.)Cancel: Stops save or load.7 Press H.[OK?] appears on the LCD.8 Press H.The write or read is performed and [Completed] appears when finished.9 Press p to exit from the Set mode.Saving/ Loading GROUP ID information to/frommicroSD memory cardGroup ID setting information can be saved to a microSD memory card, or savedinformation can be loaded to this transceiver.Enter the Set mode:1 Press and hold M for over 1 second.2 Turn O to select [10 SD CARD].3 Press H.4 Turn O to select [3 GROUP ID].5 Press H.6 Turn O to select [Write to SD] or [Read from SD].Write to SD: Saves the Group ID information to yourtransceiver to the microSD memory card.Read from SD: Loads the Group ID information to yourtransceiver from the microSD memorycard.Cancel: Stops save or load.7 Press H.[OK?] appears on the LCD.Blinks when writing
